Wanheng Dust Removal produces high-quality dust humidifiers. The dust humidifier mixer is an efficient equipment for spraying water and mixing powdery materials. It is mainly used under the dust collector of thermal power plants, and can also be used in chemical industry, metallurgy, mining, building materials and other industries. By controlling the amount of water added, the appropriate humidity requirements have been achieved.

The working principle of the dust humidifier: Two sets of spiral blade machines uniformly feed the material into the main machine, and the dry ash powdery materials entering the mixing tank/stirring tank are forced to mix and stir with the water quantitatively supplied by the water supply device, and at the same time, the humidity meets the requirements. The required materials are transported to the discharge port and discharged to achieve the purpose of eliminating dust.
The advantages of the dual-shaft structure of the dust humidifier are high mixing efficiency, tight system sealing, and no flying ash. The reducer has a compact structure, small footprint, stable transmission, low noise, uniform mixing, good wear resistance of the blades, easy operation and maintenance, and reliable operation. The blades are made of high wear-resistant manganese steel structure, and the service life of the equipment is longer than that of traditional equipment. more durable.

Installation Notes
1. The dust humidifier should be installed on a concrete foundation, and the allowable difference in horizontality of the machine body is 0.6 thousandths;
2. Check the integrity of the components and clean them thoroughly; correct the misalignment and adjust the bearing clearance.
3. Check whether there is lubricant in the bearing. If the grease has deteriorated, replace it.

The use of dust humidifier requires certain steps to be carried out in an orderly manner.
1. The machine should be started and running normally before feeding and water supply can be carried out. When shutting down, feeding should be stopped first, and the material in the standby should be unloaded before shutting down.
2. Before starting, you must carefully check whether all parts are complete, whether the fasteners are tightened, and whether the sealing parts are tight.
3. Inject No. 30 or No. 40 mechanical oil into the reducer. The user can also choose appropriate lubricating oil according to local conditions before it can be put into normal operation.

Dust humidifier equipment features
The whole machine has the characteristics of compact structure, good overall performance, advanced technology, reasonable technology, high reliability, good sealing performance, adjustable water volume, small wear, large processing capacity, long life, continuous operation, and low failure rate.