info@cn-wh.cn
QYM-ZC-10D programmable pulse controller
The QYM-ZC-10D programmable pulse controller adopts unique anti-interference technology to ensure stable and reliable operation in harsh industrial environments and can completely replace PLC control.
Using multi-function shortcut keys combined with a four-and-a-half-digit digital tube display, the control parameters can be easily modified, and the process parameters can be displayed when the controller is working, completely replacing the human-machine interface during PLC control.
The standard instrument housing with standard B-type size can be installed directly on the panel of the control cabinet, which not only increases the aesthetics, but also directly displays the status of each output point.
QYM-ZC-10D programmable pulse controller adopts an external multi-function input port, which can be applied to two situations: external pressure difference switch control or external switch + timing control. It can also realize networking between the controller and the remote DCS system. control.
The ash discharge valve control signal output by a fixed port can be set through the panel to achieve the setting of the ash discharge cycle and ash discharge time. This signal can also be used as the end signal of the cycle for the end of the cycle when communicating with DCS. Feedback signal.
Using the programmable combination output method, it is possible to realize the back-blowing dust collector with an output below 18+1 points in one machine. By setting parameters, the combination of M air inlet valve + N backflush air valve can be combined to easily achieve M+N point switching output. The imported high-power non-contact device output can realize real-time output of the output point and improve the hysteresis of the relay output.
Double fuses are used to protect the output from short circuit, and each output point has output indication. Combined with the quick quality judgment key combination, the fault location of the controller can be easily judged, and output fault judgment can be realized without disassembling the machine. Using a fast-blow fuse, in the event of an output short circuit, the fuse can be blown in advance to protect non-contact devices.
Brochure
Related Products
Previous:
PLC control cabinetOur Advantages
Stable Operation
Convenient Operation
Easy Installation
Fast Dust Removal
Direct Factory Sales
On-Time Delivery
Customization
After-Sales Guarantee
Installation Instructions
Before installing the equipment, ensure that the foundation is level;
When installing bag dust collectors and multi-tube dust collectors, pay attention to leaving empty space for ash unloading;
After installation, thoroughly clean the inside of the dust collector, and no tools or debris are allowed to remain. The manhole must be tightly sealed.
Related Products
Application Industry
Steel Metallurgy
Mining and Mining
Electric Power Industry
Cement Manufacturing
Chemical Industry
Contact
You can contact us in the following four ways. We will communicate with you as soon as we receive your inquiry!
1. Call Us.
2. Send Email.
3. Message Form.
4. Add WeChat or WhatsApp.
