The photooxygen exhaust gas purifier uses high-energy, high-ozone UV ultraviolet beams to decompose oxygen molecules in the air to produce free oxygen, that is, active oxygen. Because the positive and negative electrons carried by the free oxygen are unbalanced, they need to combine with oxygen molecules to generate ozone.

Working principle of photooxygen exhaust gas purifier
There is enough energy to generate free radicals and trigger a series of complex physical and chemical reactions. The chemical reactions of gas organic matter caused by the action of the ozone generator are ionization, dissociation, excitation, mutual combination and addition reactions between atoms and molecules in the gas phase. This energy is enough to break the chemical bonds in most gaseous organic matter, causing it to degrade.
From the perspective of air purification efficiency, we chose the principle of combining -C-band ultraviolet rays and ozone generators with higher corona current devices and pulsed corona discharge adsorption technology to eliminate harmful gases. Among them, -C-band ultraviolet rays are mainly used for Remove hydrogen sulfide, ammonia, benzene, toluene, xylene, formaldehyde, acetone, urethane, resin, and other gases and disinfect them.

Product features of photooxygen exhaust gas purifier
1. Efficient deodorization: It can effectively remove major pollutants such as volatile organic compounds (VOC), inorganic substances, hydrogen sulfide, ammonia, mercaptans, and various odors. The deodorization efficiency can reach more than 99%. The effect greatly exceeds the odor pollutant emission standards promulgated by the country in 1993 (GB14554-93).
2. No need to add any substances: You only need to set up the corresponding exhaust ducts and exhaust power, so that the odorous gas can be deodorized, decomposed and purified through this equipment, without adding any substances to participate in chemical reactions.
3. Strong adaptability: It can adapt to the deodorization and purification treatment of high concentrations, atmospheric volumes, and different odorous gas substances. It can work continuously 24 hours a day, and the operation is stable and reliable.
4. Low operating cost: This equipment does not have any mechanical movement, no noise, does not require dedicated management and daily maintenance, and only needs regular inspections. This equipment has low energy consumption (each processing 1000 cubic meters/hour, only consumes about 0.2 degrees of electricity) Electric energy), the equipment wind resistance is extremely low <50pa, which can save a lot of exhaust power energy consumption.
5. No pretreatment required: Odor gases do not require special pretreatment, such as heating, humidification, etc. The working environment temperature of the equipment is between -30℃-95℃, the humidity is between 30%-98%, and the PH value is between 2- It can work normally between 13 and 13 years old.
6. The equipment occupies a small area and is light in weight: it is suitable for special conditions such as compact layout and small space. The equipment occupies an area of less than 1 square meter/processes 10000m3/h air volume.
7. Made of high-quality imported materials: high fireproof and anti-corrosion properties, stable performance and long service life.

Advantages of photooxygen exhaust gas purifier
1. High purification efficiency and stable operation;
2. Compact structure, novel, small size, light weight, modular structure design;
3. The noise is less than 45db(A) and the wind resistance is less than 300 Pa;
4. Low operating cost and low power consumption;
5. Easy maintenance and long service life;
6. Safe, reliable and reasonably priced.

Use and installation of photooxygen exhaust gas purifier

1. The photooxygen exhaust gas purifier can be installed before or after the fan, but it is recommended to install it before the fan;
2. If the photooxygen exhaust gas purifier is installed on a bracket, it should be firmly connected to the bracket;
3. The connection between the photooxygen exhaust gas purifier and the exhaust duct must be sealed;
4. The photooxygen exhaust gas purifier can be installed indoors or outdoors, but there should be enough space for maintenance and repair;
5. The box of the photooxygen exhaust gas purifier should be reliably grounded;
6. The electrical connections in the photooxygen exhaust gas purifier body and the electric control box should be reliable and correct.